Cable selection sets

    • Cable selection set InterSelect

    • Small, handy, effective
    • Safe and quick cable selection

The InterSelect cable selection set is used for positive selection of single cable or line from a bundle of cables. For positive selection, unipolar current impulses are sent into the line under test. The receiver and the clip-on instrument are used for measuring the intensity and the polarity of these current impulses. All other cables have a weaker signal with an inverted polarity. Due to the use of the cable selection set wrong cable cuts will be avoided. The InterSelect impulse generator S11 is used for non-live power, signal and low voltage cables. The InterSelect G100 generator is used for live low voltage cables. Thanks to their compact size and insulated design, both of these generators can be placed in closed distribution cabinets, so a supervising person won’t be necessary during cable selection.

  • The cable selection set consists of the following devices:
  • Impulse generator S11 sends impulses into the non-live cables
  • The receiver S10 allows the identifcation of a cable
  • Flexible probe to receive the selection pulse
  • Optional: The InterSelect G100 is used as impulse generator for live low voltage cables.

  • Features Empfänger S10

  • Four different amplification levels, continuous setting of intermediate values
  • Cables with a loop resistance of approximately 450 Ω can be selected
  • Automatic adaptation to different clamps
  • Flexible clamp (Rogowski coil)

  • Features Impulse generator S11

  • Power supply from an external 12 V source (e.g. car battery) or from a 230 V socket
  • Application in deenergised cables
  • Rugged housing
  • Compact design enables operation in cable distribution cabinets with closed doors

  • Features Optional Selection generator G100

  • High capacity with 100 A impulse current and extended pulse width
  • Large signal-to-noise ratio; therefore a selection is also possible in strong asymmetrically loaded networks with strong interference signals (cities and industrial areas)
  • A strong measurement impulse allows the use of different flexible clamps and enables the use and an uncomplicated measurement even in case of small spaces and in cable harnesses

Products

  • Contact
  • InterEng GmbH Kabelmesstechnik
  • Radeburger Straße 9
  • D-01561 Zschorna/Germany
  •  
  • Phone.: +49 35208 3424 - 0
  • Fax: +49 35208 3424 - 10
  • mail@intereng-kmt.com